Necessary and Sufficient Conditions for Qualitative Properties of Infinite Dimensional Linear Programming Problems

Necessary and sufficient conditions for qualitative properties of infinite dimensional linear programing problems such as solvability, duality, and complementary slackness conditions are studied in this article. As illustrations for the results, we investigate the parametric version of Gale’s example.     

Enantioselective analysis of venlafaxine and its active metabolites: A review on the separation methodologies

Venlafaxine (VFX) is a serotonin and norepinephrine reuptake inhibitor chiral drug used in therapy as an antidepressant in the form of a racemate consisting of R‐ and S‐VFX. The two enantiomers of VFX exhibit different pharmacological activities: R‐VFX inhibits both norepinephrine and serotonin synaptic reuptake, whereas S‐VFX inhibits only the serotonin one. R‐ and S‐VFX are metabolized in the liver to the respective R‐ and S‐O‐desmethylvenlafaxine (ODVFX), R‐ and S‐N‐desmethylvenlafaxine (NDVFX), and R‐ and S‐N,O‐didesmethylvenlafaxine (NODVFX). The pharmacological profile of ODVFX is close to that of VFX, whereas the other two chiral metabolites (NDVFX and NODVFX) have lower affinity for the receptor sites. The pharmacokinetics of the VFX enantiomers appear stereoselective, including the metabolism process. In the past 20 years, several studies describing the enantioselective analysis of R‐ and S‐VFX in pharmaceutical formulations and its chiral metabolites in biological matrices were published. These methods encompass liquid chromatography coupled with UV detection, mass spectrometry, or tandem mass spectrometry, and capillary electrophoresis. This paper reviews the published methods used for the determination of the individual enantiomers of VFX and its chiral metabolites in different matrices.     

基于侧向磁泳的微流控芯片对两种磁性纳米球的同时分选

基于磁性纳米球在微流控芯片上的侧向磁泳, 利用微流控芯片分选了不同磁响应性的磁球. 提出了包含磁性纳米球聚集与偏移的理论模型, 用于分析磁球在芯片上的侧向位移. 在理论分析的基础上设计了芯片系统, 使不同磁响应性的磁纳米球可以在芯片系统上依次被分选. 实验结果表明, 2种磁性纳米球的分选效率均可接受, 且实验操作简单; 磁响应性强的磁球可被完全分离, 这对于珍贵分析样品的分选很有价值. 该分选系统被成功用于同时分选样品中乙型肝炎病毒的DNA与丙型肝炎病毒的反转录DNA, 在生化分析中具有广阔的应用前景.     

单宁酸/两性离子改性油-水分离膜的制备及性能

以不锈钢网为基材, 利用单宁酸对不锈钢网进行表面预处理并功能化接枝两性离子基团, 制备了新型亲水和水下超疏油的单宁酸/两性离子改性油-水分离膜(TA-ZW-SSM). 利用X射线光电子能谱仪(XPS)、 扫描电子显微镜(SEM)及接触角测量仪等表征了其化学结构、 形态和润湿性. 研究结果表明, 两性离子基团通过化学键接枝在单宁酸预处理的不锈钢网表面. 油-水分离实验结果表明, 对于不同类型的油-水混合物, 本文制备的超亲水和水下超疏油特性的TA-ZW-SSM可实现重力驱动的高效油-水分离, 并具有较好的化学稳定性及再循环性.     

Direct Hydrogenation of Nitroaromatics at Room Temperature Catalyzed by Magnetically Recoverable Cu@Fe2O3 Nanoparticles

Metal embedded in metal oxide nanoparticles are active as catalyst in plethora of industrially important reactions. Herein, embedded Cu@Fe₂O₃ nanoparticles was synthesized via a one step hydrothermal strategy which selectively catalyzes the hydrogenation of diverse nitroaromatics in H₂O at room temperature. The remarkable catalytic performance is due to the successful hybridization of metallic Cu and Fe₂O₃ which in turn allows easy electroflipping between various oxidation states of Cu and Fe. Azo- and azoxy-compounds are not formed during the catalyzed process. This evidently establish that the hydrogenation of nitroaromatics proceeds via direct route with >99% selectivity to the corresponding anilines.     

Assembly of ϵ-Keggin Polyoxometalate from Molecular Crystal to Zeolitic Octahedral Metal Oxide

Zeolitic octahedral metal oxides are inorganic crystalline microporous materials with adsorption and redox properties. New ϵ-Keggin nickel molybdate–based zeolitic octahedral metal oxides have been synthesized. ³¹P NMR spectroscopy shows that reduction of Mo^VI-based molybdates forms an ϵ-Keggin polyoxometalate that immediately transfers to the solid phase. Investigation of the formation process indicates that a low Ni concentration, insoluble reducing agent, and long synthesis time are the critical factors for obtaining the zeolite octahedral metal oxides rather than the ϵ-Keggin polyoxometalate molecule. The synthesized zeolitic nickel molybdate with Na⁺ is used as the adsorbent, which effectively separates C₂ hydrocarbon mixtures.     

Preparation of hydrophilic poly(vinylidene fluoride) membrane by in-situ grafting of N-vinyl pyrrolidone via a reactive vapor induced phase separation procedure

Increasing hydrophilicity of hydrophobic membrane is one of the strategies to improve its antifouling performance. Herein we report a procedure of reactive-vapor induced phase separation to prepare an N-vinyl pyrrolidone (NVP) modified poly(vinylidene fluoride) (PVDF) membrane to improve its hydrophilicity. PVDF solution containing NVP monomer was cast in ammonia water vapor atmosphere to prepare the modified membrane. During the process, PVDF was dehydrofluorinated by the reactive vapor of ammonia water to generate double bond of FC═CH, and then NVP was grafted. The degree of grafting modification and the microstructure evolution of the membrane were studied by adjusting the amount of NVP addition. A possible mechanism of membrane formation from crystallization gelling to non-crystallization gelling has been proposed to understand the morphology change from nodular sphere to bi-continuous microstructure with fibril matrix. It has been found that rising the degree of modification has changed the polymorph of PVDF from β to α crystalline phase, as well as turned the hydrophobic PVDF membrane into hydrophilic. Moreover, the modified membrane displayed obvious reduction in bovine serum albumin adsorption, suggesting improvement in anti-fouling performance. Therefore, our work provides an easy strategy to prepare hydrophilic PVDF membrane, which may have promising potential applications.     

Comparative analysis of shape memory-based self-healing coatings

Self-healing materials exhibit the ability to repair and to recover their functionality upon damage. Here, we report on an investigation into preparation and characterization of shape memory assisted self-healing coatings. We built on past work in which poly(ε-caprolactone) electrospun fibers were infiltrated with a shape memory epoxy matrix and delve into fabricating and characterizing a coating with the same materials, but employing a blending approach, polymerization induced phase separation. After applying controlled damage, the ability of both coatings to self-heal upon heating was investigated. In both methods, coatings showed excellent thermally induced crack closure and protection against corrosion, with the blend approach being more suitable for large-scale applications given its process simplicity. Two different approaches to the preparation of shape memory-based self-healing coatings were compared for their ability to heal structurally and functionally by heating. These two approaches, electrospinning versus polymerization-induced phase separation were found to feature comparable and quite complete healing, with the latter system offering the advantage of facile processing. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1415–1426     

Isotopic separation of lithium ions by capillary zone electrophoresis

Separation of ⁶Li and ⁷Li isotopes by CZE was demonstrated. The BGE contained 5 mM 4‐aminopyridine, 0.9 mM oxalic acid, 0.25 mM CTAB, and 0.25% w/v Tween 20 (рН = 9.2). The running conditions were +25 kV at 30°C with indirect photometric detection at 261 nm. Under optimal experimental conditions, the analysis time was less than 21 min. Separation of Li preparations with mole fraction of ⁶Li ranging from 3.44 up to 90.38% was demonstrated.     

Measuring densities of polymers by magneto-archimedes levitation

In magneto-Archimedes levitation, a polymer can be levitated to a balanced position, and its levitation height is mainly related to the density of the polymer. Here, a novel method for measuring the density of polymers based on magneto- Archimedes levitation is proposed. For a designed measurement device, an equation can be fitted by a series of experiments with standard density glass beads. Then, the polymer's density can be calculated via the equation. In this paper, a device with magnets at a distance of 60 mm was chosen as an example. Experimental results showed that the proposed method could measure all types of polymer with an accuracy of 0.002–0.01 g/cm³. Moreover, the proposed method can clearly distinguish between polymers with small density differences (<0.03 g/cm³). Because of its high accuracy, high sensitivity, low cost and convenience, the proposed method could be widely used in polymer testing, especially in density-based testing.